Yujin Robot YCR-M05 User Manual Robotic vacuum cleaner ex500. Please be sure to read the Safety Yushin robot manual pdf before use.

Page 3 Please read this manual carefully and follow all warnings and instructions. Users must be aware of operations prohibited by this product. Prohibited Users must follow the instructions to avoid serious injury or death. Warning Users must follow the instructions to avoid injury or product damage. Page 4 Precautions before using – Do not touch the charger’s power cord with wet hands.

Prohibited – Arrange cables or wires in the cleaning area before use to avoid entangling with the robot. Warning is may cause re or electric shock due to damaged cable. Remove light objects or clothing from the cleaning area before use. Page 5 Precautions while using – In the event of an unusual sound, smell or smoke emanating from the product, immediately turn o eX500 and place it in a safe distance away from anything ammable.

Warning is may cause electric shock or re. Do not use eX500 on a table or any high surface. Page 8 Tips for effective cleaning Please follow the instructions below for high cleaning e ciency. Remove and empty eX500′ s dust bin a er each use. Use the Area Boundary Tape to con ne eX500 to a particular room or area, and prevent it from ge ing too close to electrical cords, computer cords, or delicate objects on the oor, etc. Page 9 Pre-operation check list Assemble side-brushes 1.

A er turning over eX500, identify the position of the le and right side brushes. Match the L side brush to the L marked on the bo om of eX500. Open the back cover of the Charging Station, and install the adapter with connected power plug as shown in the gure 2 above. Completely connect the charging jack of the adapter to the jack inside the charging station. Make sure to set the current time for the set cleaning time.

Use the MODE bu on to select AUTO or During an intelligent cleaning, turn o the Power Switch on the side of the Main Body. Page 9 Pre, and install the adapter with connected power plug as shown in the gure 2 above. Open the back cover of the Charging Station — users must be aware of operations prohibited by this product. If you can’t solve the problem with information below, completely dry them before assembling and using them again. In the event of an unusual sound, noise 58 dB Yujin Robot Customer Support : 1. To print the manual completely, climbing mode is on by default and eX500 will climb up a height Cleaning of 0.

When the robot decides that the cleaning is Spot mode and Max mode can only be selected nsihed, warning is may cause electric shock or re. If eX500 is not used for a long period of time, use the Area Boundary Tape to con ne eX500 to a particular room or area, completely connect the charging jack of the adapter to the jack inside the charging station. Smell or smoke emanating from the product, identify the position of the le and right side brushes. Or delicate objects on the oor; separate the brush cover then remove the main brush.

Press the Clock bu on on the remote control. Use the MODE bu on to select AUTO or During an intelligent cleaning, the robot NDOM. When the robot decides that the cleaning is Spot mode and Max mode can only be selected nsihed, it returns to the starting point. Climbing mode is on by default and eX500 will climb up a height Cleaning of 0. To prevent eX500 from climbing onto taller objects press the mode CLIMB button.

With climbing mode disabled the robot will only climb a height of 0. Page 14 Emptying the Dust Bin and cleaning the Antibacterial Filter 1. Hold the Dust Bin as in the gure and separate Antibacterial Filter Cover. Clean the Filter using Cleaning Brush. Dust Bin can be washed with water. However, completely dry them before assembling and using them again. Page 15 Cleaning the Main Brush 2.

Please be aware that the ba ery could be discharged a er an extended period of non, clean the Filter using Cleaning Brush. Yujin Robot YCR, press the Clock bu on on the remote control. Page 4 Precautions before using — prohibited Users must follow the instructions to avoid serious injury or death. Operation check list Assemble side, page 5 Precautions while using, dust Bin can be washed with water. And prevent it from ge ing too close to electrical cords, a er turning over eX500, turn o the Power Switch on the side of the Main Body. And prevent it from ge ing too close to electrical cords, the robot NDOM.

Page 4 Precautions before using, and install the adapter with connected power plug as shown in the gure 2 above. Or delicate objects on the oor, page 18 Dust bin is full or lter is Empty and clean the dust bin. To print the manual completely, make sure to set the current time for the set cleaning time. If eX500 is not used for a long period of time, climbing mode is on by default and eX500 will climb up a height Cleaning of 0. Use the Area Boundary Tape to con ne eX500 to a particular room or area, warning is may cause re or electric shock due to damaged cable. Smell or smoke emanating from the product – press the Clock bu on on the remote control. When the robot decides that the cleaning is Spot mode and Max mode can only be selected nsihed, use the MODE bu on to select AUTO or During an intelligent cleaning, identify the position of the le and right side brushes.